更新時間：2022-08-31
文章來源：http://www.zcyzl.cn/
閱讀量：22
智能會議音響系統揚聲器發出噪音或哨聲時怎么回事呢？還有其他方面的問題會不會出現呢？下面智能會議系統廠家來為您講講。
What happens when the speaker of the intelligent conference sound system makes noise or whistle? Will there be any other problems? The following intelligent conference system manufacturers will tell you.
故障現象：智能會議音響系統揚聲器發出噪音或哨聲
Fault phenomenon: the speaker of the intelligent conference audio system makes noise or whistle
解決建議：1。麥克風電池電量低或功率放大器的音量調節過高，容易產生噪音。建議用戶更換麥克風電池或適當減小功率放大器的體積。2.麥克離喇叭太近或與喇叭直接相對，容易產生嘯聲。請調整麥克風和喇叭之間的距離和角度；如果功率放大器的音量過高，也會產生嘯聲。您可以嘗試調低功率放大器的音量。
Solutions: 1. The microphone battery is low or the volume adjustment of the power amplifier is too high, which is easy to generate noise. It is recommended that the user first replace the microphone battery or appropriately reduce the volume of the power amplifier. 2. The microphone is too close to the horn or directly opposite to the horn, which is easy to produce howling. Please adjust the distance and angle between the microphone and the speaker; If the volume of the power amplifier is too high, howling will also occur. You can try to turn down the volume of the power amplifier.
智能會議系統音頻系統麥克無聲
Intelligent conference system audio system mic silent
癥狀：智能會議系統音頻系統麥克無聲（無線）
Symptoms: intelligent conference system audio system mic silent (wireless)
解決方案建議：檢查麥克風電池是否已耗盡；無線麥克風接收器是否通電；接收器和混音器之間的連接是否連接或松動。
Solution suggestion: check whether the microphone battery has been exhausted; Whether the wireless microphone receiver is powered on; Whether the connection between the receiver and the mixer is connected or loose.
智能會議系統的揚聲器不發聲。
The speaker of the intelligent conference system does not make sound.
故障現象：智能會議系統揚聲器不響。
Fault phenomenon: the speaker of the intelligent conference system does not sound.
解決方案建議：
Solution suggestions:
1。檢查功率放大器是否已打開，或?yàn)槠涔╇姷牟遄欠褚淹姟Ｓ脩敉ǔＴ陉P(guān)閉系統時關閉設備電源。
1。 Check that the power amplifier is turned on or that the socket that powers it is energized. The user usually turns off the power of the device when turning off the system.
2。如果功率放大器打開，請檢查系統是否靜音，或功率放大器播放的音量是否過低，以使揚聲器靜音或播放的音量過低。
2。 If the power amplifier is turned on, check whether the system is mute or whether the volume played by the power amplifier is too low to mute the speakers or play the volume too low.
3。如果放大器打開，音量也會調整，喇叭仍然沒有聲音，檢查混音器是否關機。
3。 If the amplifier is turned on, the volume will also be adjusted, and the speaker still has no sound. Check whether the mixer is turned off.
隨著信息技術的進步，智能視頻會議的應用越來越廣泛。然而，由于大多數用戶都是普通用戶，他們?cè)跓o(wú)意中了解了操作，因此在使用過程中對一些小問題束手無策，影響了使用效果。以上所講解問題希望你能夠明白，關注我們
http://www.zcyzl.cn了解更多！
With the development of information technology, the application of intelligent video conference is more and more extensive. However, since most users are ordinary users, they inadvertently understand the professional operation, so they are helpless for some small problems in the use process, which affects the use effect. I hope you can understand the problems explained above and pay attention to us http://www.zcyzl.cn Learn more!
魯公網安備 37010202002516號
